fbpx
Isovalve Orders
You are here: Home / Protected: Customer Product Area / Isovalve Orders / Products / IsoTAPS / IsoTap™ Female (IsoTap15) – with 15mm outlet nipple and Hot...

IsoTap™ Female (IsoTap15) – with 15mm outlet nipple and Hot & Cold indicators

Use

APPLIANCE/FIXTURE SERVICE VALVE
The IsoTap™ range has been designed to be used as a service and flow reduction valve which is installed prior to a plumbing fixture or appliance.
A 15mm outlet nipple (IsoN15) is supplied with the IsoTap15 – however 10mm (IsoN10) and 20mm (IsoN20) nipples are available.
Hot and cold indicators included.

Features and Benefits

  • Removable and interchangeable outlet nipples allow flexibility while the inline filter means tapware complies with warranty conditions.
  • The needle valve allows for excellent flow control.
  • The IsoTap™ range (excluding swivel) can be used as a test plug when the handle and outlet nipple are removed – store the handle and nipple safely and use masking tape to protect the chrome during construction.
  • The IsoFlange (IsoWFF) slides over the linear shape of IsoTap™ reducing the need to be accurate with nippling tube.

Enquire about this product
SKU: IsoTap15 Categories: ,

Description

Build of Materials
Brass – DZR Brass 352 precision machined bar
O-Rings– twin Nitrile O-Rings Durometer Hardness Duro 70
Washer – Acetyl
Surface Finish – Chrome Plating
Filter – Nylon PA-66 & 304 Stainless Steel 40×40 Mesh Aperture 0.42mm

Flow and Pressure Operation
Operating pressure:  Min 20kPa to Max 1600kPa.
Maximum pressure test for pipework pressure testing – up to 2000kPa.
Low pressure:  for water pressures below 35kPa remove inline filter – Isovalve™ will have no effect on final flow rates when installed prior to a typical ceramic disc mixer.
At 20kPa a single Isovalve™ will deliver a minimum flow of 6.5L/min.
Operating pressure:  At an operating pressure of 500kPa, a single Isovalve™ can deliver a maximum flow of approximately 33L/min.
Operating temperature range:  short term minimum 0oC to maximum 90oC.  Extended term 60oC.

Certification and Standards
Isovalves and accessories are manufactured and certified to comply with ATS5200.012, AS3688:2005 and ISO5208
DZR Brass complies with AS2345
WaterMark Certification pending.

Guarantee
Every Isovalve™ is factory tested before packaging.  Isovalves are guaranteed against defective parts for a period of five (5) years.

Also see Isovalve IsoTap20
Also see Isovalve IsoTapSw15

Technical Downloads

Link to Technical Specs: IsoTap15

Parts and Master Assembly Detail

Features:

  • Removable and interchangeable outlet nipples (10, 15 and 20mm outlet nipples available)
  • Needle valve for excellent flow control
  • Inline filter
  • Conventional tap handle
  • 15mm IsoNipple supplied
  • Hot and Cold Indicators
  • DZR brass; chrome plated

Installation Instructions

IsoTap15

INSTALLATION INSTRUCTIONS
Conventional Install
Slide Wall Flange(IsoWFF) over IsoTap™
Apply sealant to male thread and screw on no more than 10mm DO NOT OVER-TIGHTEN

OR  

Use IsoTap™ both as a tap and a temporary test plug.

The IsoTap™ Range can be used in place of a test plug by simply removing the outlet nipple and tap handle, leaving a cylindrical /lineal plug that can easily have wall linings etc drilled and installed over.

Instructions at Pre-Line Stage
Remove outlet nipple and tap handle.

Store carefully ensuring O-rings are not lost.

Plan installation considering finished wall thickness with outlet nipple.
Apply sealant and screw on IsoTap™.

Ensure IsoTap™ is closed and turn on water supply.

IsoTap15 can be used to pressure test to 2000 kpa and to flush out pipework.  Protect chrome IsoTap™ with masking tape.

Instructions at Final Fit Off
There is no need to turn the water off at a remote location.  Slide on wall flange (IsoWFF)

Screw on IsoNipple ensuring O ring and sealing surface is clean.  Attach IsoTap™ handle.

Connect fixture.  Turn on water at the IsoTap™

Adjust water to desired flow and commission.

10 (IsoN10) and 20mm (IsoN20) outlet nipples are available, enabling various configurations to suit.

Warranty Information

Isovalve 5 Year Warranty

Related products

Isovalve™ Handle Key (IsoVKey) IsoTap™ Female (IsoTap20) – with 20mm outlet nipple and Hot &...